|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
|
THREAD MILLS CARBIDE UN TIALN COATED COOLANT W/ CHAMFER - L427E series
|
|
|
|
|
|
|
|
| EDP |
Size |
Pitch |
Cutter Diamter |
Shank Diameter |
Thread Length |
Overall Length |
Angle |
No. of Flute |
| TiAlN |
TPI |
D1 |
D2 |
L1 |
L2 |
A |
Z |
| L427E420 | 1/4 | 28 | 0.205 | 0.312 | 0.5 | 2.5 | 90° | 3 |
| L427E500 | 3/8 | 24 | 0.325 | 0.5 | 0.75 | 3 | 90° | 4 |
| L427E400 | 1/4 | 20 | 0.19 | 0.312 | 0.5 | 2.5 | 90° | 3 |
| L427E580 | 1/2 | 20 | 0.435 | 0.625 | 1 | 3.5 | 90° | 4 |
| L427E440 | 5/16 | 18 | 0.24 | 0.375 | 0.625 | 2.5 | 90° | 3 |
| L427E480 | 3/8 | 16 | 0.29 | 0.375 | 0.75 | 3 | 90° | 4 |
| L427E720 | 3/4 | 16 | 0.655 | 0.75 | 1.5 | 4 | 90° | 5 |
| L427E520 | 7/16 | 14 | 0.335 | 0.5 | 0.75 | 3.5 | 90° | 4 |
| L427E560 | 1/2 | 13 | 0.385 | 0.5 | 1 | 3.5 | 90° | 4 |
| L427E600 | 9/16 | 12 | 0.455 | 0.625 | 1.2 | 3.5 | 90° | 4 |
| L427E640 | 5/8 | 11 | 0.515 | 0.625 | 1.25 | 3.5 | 90° | 4 |
| L427E700 | 3/4 | 10 | 0.63 | 0.75 | 1.5 | 4 | 90° | 5 |
|
|
 |
|
