|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Milling |
Home >
Milling > HIGH PERFORMANCE > CARBIDE > i-Xmill
|
 |
|
|
|
|
i-Xmill CORNER RADIUS HOLDERS, STEEL(TAPER NECK TYPE) - Corner Radius Inserts ONLY
|
|
|
|
|
|
|
|
 i-Xmill Corner Radius Holders - Steel : Taper Neck Type |
| MILL DIAMETER(D1) |
EDP No. |
SHANK DIAMETER(D2) |
NECK DIAMETER(D3) |
LENGTH OF CUT(L1) |
LENGTH BELOW SHANK(L3) |
OVERALL LENGTH(L2) |
INTERFERENCE ANGLE (θ°) |
LENGTH TYPE |
WRENCH |
SCREW |
| 5/16 | ZRT1032 | 1/2 | 17/64 | 13/32 | 7/8 | 4 | 13°58´ | Regular | TWF07 | TX0807 |
| ZRT2032 | | | | 2 | 5*1/8 | 4°12´ | Long | | |
| 3/8 | ZRT2410 | 1/2 | 5/16 | 17/32 | 1 | 4 | 9°27´ | Regular | TWF08 | TX1008 |
| ZRT2420 | | | | 2 | 5*15/16 | 3°6´ | Long | | |
| 1/2 | ZRT3220 | 5/8 | 27/64 | 5/8 | 2*3/8 | 6*5/16 | 3°19´ | Long | TWF10 | TX1210 |
Unit:Inch
| i-Xmill Corner Radius Holders - Steel : Taper Neck Type |
| MILL DIAMETER(D1) |
EDP No. |
SHANK DIAMETER(D2) |
NECK DIAMETER(D3) |
LENGTH OF CUT(L1) |
LENGTH BELOW SHANK(L3) |
OVERALL LENGTH(L2) |
INTERFERENCE ANGLE (θ°) |
LENGTH TYPE |
WRENCH |
SCREW |
| 8 | ZRT8011 | 12 | 6.7 | 10 | 22 | 100 | 9° | Regular | TWF07 | TX0807 |
| ZRT8021 | | | | 50 | 130 | 2°43´ | Long | | |
| 10 | ZRT1001 | 12 | 8.6 | 13 | 25 | 100 | 4°45´ | Regular | TWF08 | TX1008 |
| ZRT1002 | | | | 50 | 150 | 1°32´ | Long | | |
| 12 | ZRT1202 | 16 | 10.2 | 15 | 60 | 160 | 2°32´ | Long | TWF10 | TX1210 |
Unit:Metric
|
|
 |
|
